Author Topic: Known bugs with the (vanilla) CaptainSim B727  (Read 317 times)

Pete (CEO)

  • ACV Administrator
  • ACV Candidate
  • *****
  • Posts: 14
    • Arrow Cargo Virtual
Known bugs with the (vanilla) CaptainSim B727
« on: February 05, 2018, 04:47:53 AM »
Known bugs with Version 2.7:
- After loading a savegame the lights (landing lights, taxi lights, etc.) are not set correctly.
- After loading a savegame the value of alert altitude is not set correctly
- After loading a savegame one of the two autopilot main-switches is not set correctly
- After loading a savegame the switch FD-Mode-Selector and FD-Pitch is not set correctly
- After loading a savegame, the settings of the weather radar are not loaded properly
- The vc night texture of the switch Nav/GPS is wrong
- Switching to red light doesn't change the dynamic light in vc to red
- Gear up or gear down does not start any sound-effect
- Flight-Engineer: Galley switches show OFF but mean ON and vice versa
- On ground with no engines and no APU running but connected with external power, runs out of energy bug with part-time freezing of the cockpit knobs and switches
- Weather radar in VC, in zero position the tilt knob should look to left and not up, as it is shown on the gauge, so weather radar VC<->Gauge do not match
- Broken variable <A:LIGHT BEACON>, not (fully) linked with the switch in the virtual cockpit
- Broken variable <A:LIGHT LOGO> not (fully) linked with the switch in the virtual cockpit
- Broken variable <A:LIGHT TAXI> not (fully) linked with the switch in the virtual cockpit
- Broken variable <A:LIGHT NAV> not (fully) linked with the switch in the virtual cockpit
- Flight-Engineer: External Power Switch ON/OFF not always working. Seems that after being in the air and back on ground it is not possible anymore to activate it. It is blocked in deactivated position.
- Cargo-liveries are missing the line in aircraft.cfg: "atc_parking_types=RAMP, CARGO"
- Door/Item Gauge: The buttons do not show if a door is open or not, the buttons stay gray instead of becoming green

The following sound files are missing in P3D version of CS B727 v.2.7:
- [GEAR_UP_WARNING_SOUND]
- [STALL_WARNING]
- [EXIT_OPEN]
- [EXIT_CLOSE]
- [OVERSPEED_WARNING_SOUND]
- [AP_DISENGAGE_SOUND]
- [GLIDESLOPE_WARNING_SOUND]
- [GEAR_DOWN]
- [GEAR_UP]
Best regards, Pete (CEO)